EVERYTHING STARTED WITH AN IDEA, WITH IMAGINATION...
close

EVERYTHING STARTED WITH AN IDEA, WITH IMAGINATION...

When we combined our knowledge and enthusiasm with our imagination
and courage, a quarter-century success story emerged.
Founded 25 years ago, Metkon as a young and dynamic company
had delivered more than 20.000 instruments globally. We offer our
expertise and know-how to our customers worldwide to enable them
reach the "True and Excellent Sample".
We thank to our customers, employees, suppliers and partners. 
 

* Fields are required

High-Volume Cutting Systems

SERVOCUT 602-AX-R


Images

Catalogues

Description

4-Axis Multi-Target Automatic Cutting Machine

SERVOCUT 602-AX-R is designed for cutting complex shaped specimens in any angle without re-clamping.

• Equipped with 360° rotary table with servo motor drive
• Ability to cut specimens up to 20 different cutting lines in different angles
• Program memory for cutting lines and parameters for Multi-Target
Cutting.

SERVOCUT 602-AX-R combines the most advanced cutting techniques in the same machine. Equipped with the large automated rotary table that eliminates re-clamping, saves time and provides maximum automation. Servo motor driven rotary table allows very precise angle positioning. Save setup time by storing up to 20 cutting lines with different angles which can be recalled at any time for quick and easy loading. 

4-axis cutting is the fastest way to reduce setups, boost throughput, and increase accuracy on complex parts. The angle of rotary table can be adjusted with 0.1° accuracy. With combination of all 4-axis, the cutting can be done in any possible position without re-clamping. 

Technical Specifications

Metkon A.Ş.
Order No 14 87-AX-R
Model 602-AX-R
Max. Cut-off Wheel Diameter Ø600 mm
Max. Cutting Capacity, Ø Ø225 mm
Max. Cutting Capacity, HxD 100x500 mm
Z-Axis Travel, (mm) 340 mm
Y-Axis Travel, (mm) 560 mm
X-AxisTravel, (mm) 540 mm
T-Table Dimension, (mm) Ø710 mm Rotary Table
Rotary Table Positioning Angle 360° with 0.1° Accuracy
T-Slot dimension, (mm) 18 mm
Cutting Motor Power (S1) 15 kW
Variable Wheel Speed 600-2400 RPM
Wheel Diameter Measurement Standard
Constant Peripheral Wheel Speed Standard
Cutting Feedrate, (μm/s) 20-5000 μm/s
HMI Touch Screen Controller 9.7 inch
Chop Cutting in Z- Axis Auto
Table Feed Cutting in Y-Axis Auto
Angle Cutting Standard
Parallel Cutting in X-axis Standard
Multi Target Cutting Standard
Table Oscillating Cutting Standard
Rapid Pulse Cutting Standard
Smart Feed Control Standard
StepCut; SegmentCut; DiagonalCut Optional
Automatic Cleaning System Optional
Central Lubricating System Optional
Size, WxDxH, (cm) 184x173x236
Weight 1600 kgs
Recirculation Cooling Unit 200 lt

Accessories

Additional Cutting Methods for SERVOCUT 602
GR 0928 Software package for optional cutting methods;
  *Diagonal Cut
  *Step Cut
  *Segment Cut
   
Power Supply for SERVOCUT 602
GR 1226 Transformer kit for 200-240 VAC, 3 phase, 50/60 Hz mains voltage
   
Cooling Systems for SERVOCUT 602
GR 1530 Recirculation Cooling Tank, 200 lt, for SERVOCUT 602
YM 8816 Fine filter sheets for recirculation cooling tank (GR 1530), 10 pcs
GR 1559 Coolant level sensor for recirculation cooling tank
  Informs operator when coolant level is insufficient.
GR 1540 Magnetic collector rod for recirculation cooling tank
GR 0591 BANDCOOL Band Filter Unit for SERVOCUT 602
  Band filter conveyor for the automatic collection and disposal 
  of swarfs, with capacity of 150 lt., with fluid level indicator,
  complete system on wheels, with connection kit.
  400V, 3-phase, 50 Hz
YM 8877 Filter roll for BANDCOOL, 50 m
   
Accessories for SERVOCUT 602
GR 0134 FUMEFILTER Centrifugal Separator for SERVOCUT 602
  Removes coolant mist for better illumination and viewing
  (To be ordered simultaneously together with the machine order)
YM 8836 Spare Filter Kit for FUMEFILTER (GR 0134)
GR 0135 Laser Alignment Unit for SERVOCUT 602
  (To be ordered simultaneously together with the machine order)
GR 0136 Central Lubricating System with programmable maintenance cycle
  (To be ordered simultaneously together with the machine order)
GR 0137 AUTOCLEAN Automatic Cleaning System for cutting chamber
  (To be ordered simultaneously together with the machine order)
GR 0140 3-lights warning beacon with audible signal
  (To be ordered simultaneously together with the machine order)
   
Clamping Devices for SERVOCUT 602
GR 0610 Mechanical Clamping Device
GR 0611 Serial Clamping Device for clamping multiple specimens from 1 to 4
GR 0613 Angular Precision Clamping Device in 3-Axis Direction
15 02 MBU 1031 Vertical Clamping Device with clamping shoe, clamping height up to 115 mm.
15 04 MK 10 22 Height Block, 70 mm
GR 0033 Chain spanner set with anchor block
15 00 V-Block for holding parts above table slots
GR 0615 Adjustable V-Support, Small (Height Range: 57-67 mm)
GR 0616 Adjustable V-Support, Medium (Height Range: 65-85 mm)
GR 0617 Adjustable V-Support, Large (Height Range: 85-115 mm)
GR 0618 Adjustable V-Support, Extra Large (Height Range: 115-155 mm)
   
Spare Part Kit for SERVOCUT 602
GR 1966 Recommended Set of Spare Parts, SERVOCUT 602

Consumables

Treno Series Abrasive Cut-off Wheels (Pack of 10)
TRENO-NF 19-090 Ø 500 mm, for Non-Ferrous Steels
TRENO-M 19-092 Ø 500 mm, for Medium Hard Steels > 23-55 HRC <
TRENO-S 19-093 Ø 500 mm, for Hard Steels > 50-60 HRC <
     
Treno Series Abrasive Cut-off Wheels (Pack of 5)
TRENO-M 19-097 Ø 600 mm, for Medium Hard Steels > 23-55 HRC <
TRENO-S 19-098 Ø 600 mm, for Hard Steels > 50-60 HRC < 
     
Cutting Fluid
METCOOL 19-902 Nature Friendly Soluble Oil, 5 lt.
METCOOL II 19-905 Nature Friendly Soluble Oil, 1 lt.
METCOOL-NF 19-906 Nature Friendly Soluble Oil, 5 lt.
    Perfect corrosion protection for reactive metals like copper, brass,
    cobalt, aluminum, tungsten carbide, etc…
FACEBOOK TWITTER YOUTUBE LINKEDIN
Metkon