When we combined our knowledge and enthusiasm with our imagination
and courage, a quarter-century success story emerged.
Founded 25 years ago, Metkon as a young and dynamic company
had delivered more than 20.000 instruments globally. We offer our
expertise and know-how to our customers worldwide to enable them
reach the "True and Excellent Sample".
We thank to our customers, employees, suppliers and partners.
• Equipped with 360° rotary table with servo motor drive
• Ability to cut specimens up to 20 different cutting lines in different angles
• Program memory for cutting lines and parameters for Multi-Target
Cutting.
SERVOCUT 602-AX-R combines the most advanced cutting techniques in the same machine. Equipped with the large automated rotary table that eliminates re-clamping, saves time and provides maximum automation. Servo motor driven rotary table allows very precise angle positioning. Save setup time by storing up to 20 cutting lines with different angles which can be recalled at any time for quick and easy loading.
4-axis cutting is the fastest way to reduce setups, boost throughput, and increase accuracy on complex parts. The angle of rotary table can be adjusted with 0.1° accuracy. With combination of all 4-axis, the cutting can be done in any possible position without re-clamping.
| Order No | 14 87-AX-R |
| Model | 602-AX-R |
| Max. Cut-off Wheel Diameter | Ø600 mm |
| Max. Cutting Capacity, Ø | Ø225 mm |
| Max. Cutting Capacity, HxD | 100x500 mm |
| Z-Axis Travel, (mm) | 270 mm |
| Y-Axis Travel, (mm) | 560 mm |
| X-AxisTravel, (mm) | 530 mm (+/-10 mm) |
| T-Table Dimension, (mm) | Ø710 mm Rotary Table |
| Rotary Table Positioning Angle | 360° with 0.1° Accuracy |
| T-Slot dimension, (mm) | 18 mm |
| Cutting Motor Power (S1) | 15 kW |
| Variable Wheel Speed | 600-2400 RPM |
| Wheel Diameter Measurement | Standard |
| Constant Peripheral Wheel Speed | Standard |
| Cutting Feedrate, (μm/s) | 20-5000 μm/s |
| HMI Touch Screen Controller | 9.7 inch |
| Chop Cutting in Z- Axis | Auto |
| Table Feed Cutting in Y-Axis | Auto |
| Angle Cutting | Standard |
| Parallel Cutting in X-axis | Standard |
| Multi Target Cutting | Standard |
| Table Oscillating Cutting | Standard |
| Rapid Pulse Cutting | Standard |
| Smart Feed Control | Standard |
| StepCut; SegmentCut; DiagonalCut | Optional |
| Automatic Cleaning System | Optional |
| Central Lubricating System | Optional |
| Size, WxDxH, (cm) | 184x173x236 |
| Weight | 1600 kgs |
| Recirculation Cooling Unit | 200 lt |
| Additional Cutting Methods for SERVOCUT 602 | |
| GR 0928 | Software package for optional cutting methods; |
| *Diagonal Cut | |
| *Step Cut | |
| *Segment Cut | |
| Power Supply for SERVOCUT 602 | |
| GR 1226 | Transformer kit for 200-240 VAC, 3 phase, 50/60 Hz mains voltage |
| Cooling Systems for SERVOCUT 602 | |
| GR 1530 | Recirculation Cooling Tank, 200 lt, for SERVOCUT 602 |
| YM 8816 | Fine filter sheets for recirculation cooling tank (GR 1530), 10 pcs |
| GR 1559 | Coolant level sensor for recirculation cooling tank |
| Informs operator when coolant level is insufficient. | |
| GR 1540 | Magnetic collector rod for recirculation cooling tank |
| GR 0591 | BANDCOOL Band Filter Unit for SERVOCUT 602 |
| Band filter conveyor for the automatic collection and disposal | |
| of swarfs, with capacity of 150 lt., with fluid level indicator, | |
| complete system on wheels, with connection kit. | |
| 400V, 3-phase, 50 Hz | |
| YM 8877 | Filter roll for BANDCOOL, 50 m |
| Accessories for SERVOCUT 602 | |
| GR 0134 | FUMEFILTER Centrifugal Separator for SERVOCUT 602 |
| Removes coolant mist for better illumination and viewing | |
| (To be ordered simultaneously together with the machine order) | |
| YM 8836 | Spare Filter Kit for FUMEFILTER (GR 0134) |
| GR 0135 | Laser Alignment Unit for SERVOCUT 602 |
| (To be ordered simultaneously together with the machine order) | |
| GR 0136 | Central Lubricating System with programmable maintenance cycle |
| (To be ordered simultaneously together with the machine order) | |
| GR 0137 | AUTOCLEAN Automatic Cleaning System for cutting chamber |
| (To be ordered simultaneously together with the machine order) | |
| GR 0140 | 3-lights warning beacon with audible signal |
| (To be ordered simultaneously together with the machine order) | |
| Clamping Devices for SERVOCUT 602 | |
| GR 0610 | Mechanical Clamping Device |
| GR 0611 | Serial Clamping Device for clamping multiple specimens from 1 to 4 |
| GR 0613 | Angular Precision Clamping Device in 3-Axis Direction |
| 15 02 | MBU 1031 Vertical Clamping Device with clamping shoe, clamping height up to 115 mm. |
| 15 04 | MK 10 22 Height Block, 70 mm |
| GR 0033 | Chain spanner set with anchor block |
| 15 00 | V-Block for holding parts above table slots |
| GR 0615 | Adjustable V-Support, Small (Height Range: 57-67 mm) |
| GR 0616 | Adjustable V-Support, Medium (Height Range: 65-85 mm) |
| GR 0617 | Adjustable V-Support, Large (Height Range: 85-115 mm) |
| GR 0618 | Adjustable V-Support, Extra Large (Height Range: 115-155 mm) |
| Spare Part Kit for SERVOCUT 602 | |
| GR 1966 | Recommended Set of Spare Parts, SERVOCUT 602 |
| Treno Series Abrasive Cut-off Wheels (Pack of 10) | ||
| TRENO-NF | 19-090 | Ø 500 mm, for Non-Ferrous Steels |
| TRENO-M | 19-092 | Ø 500 mm, for Medium Hard Steels > 23-55 HRC < |
| TRENO-S | 19-093 | Ø 500 mm, for Hard Steels > 50-60 HRC < |
| Treno Series Abrasive Cut-off Wheels (Pack of 5) | ||
| TRENO-M | 19-097 | Ø 600 mm, for Medium Hard Steels > 23-55 HRC < |
| TRENO-S | 19-098 | Ø 600 mm, for Hard Steels > 50-60 HRC < |
| Cutting Fluid | ||
| METCOOL | 19-902 | Nature Friendly Soluble Oil, 5 lt. |
| METCOOL II | 19-905 | Nature Friendly Soluble Oil, 1 lt. |
| METCOOL-NF | 19-906 | Nature Friendly Soluble Oil, 5 lt. |
| Perfect corrosion protection for reactive metals like copper, brass, | ||
| cobalt, aluminum, tungsten carbide, etc… | ||
